FAQ: SM-1 WIRELESS CRANE CONTROLLER
Share
SM-1 WIRELESS CRANE CONTROLLER
IP67 | WD/ES/SM/CT CERVIS SPECIFICATIONS
Wireless Remote AdvanTec PN 113327
Use to replace any existing Steelhead wireless remote. Nothing more is needed, just plug and play.
• No Programming Required
• Receiver is Included
• Use with All Crane Sizes
• Replace Wired Controller or Add Wireless to Existing Crane
o For ES/CT Cranes Use Y-Connector (PN 106357)
o For SM Cranes Use Y-Connector (PN 113348)
Specifications
• Controller Size – 2.5” wide x 5” long
• Receiver Size – 4.5” wide x 5.5” long
• Uses (2) AAA Batteries, included
• 3 Year Warranty (36 months from ship date)
FAQ
• If I break my handheld remote, can I purchase just the handheld transmitter without the receiver?
YES ‐ AdvanTec PN 113422
• Can I get two handheld transmitters and only 1 receiver?
YES - add PN 113422 to the order, they can not both be hooked up to the receiver at the same time, when you try to pair the second controller, it automatically deletes the first controller.
• If I have 2 cranes on my vessel, can they both use this wireless system and not interfere with each other?
Not tested, but it is believed since a receiver can only pair to 1 controller at a time, 2 cranes with individual receivers & their own remotes, won’t interfere with the other. (No programming required)
• “Nothing more needed, plug and play” - Does this also include the old model SM3000/1500 that required different wiring?
YES